AVAILABLE IN ALL STAINLESS STEEL
UNIVERSAL MOUNTING BRACKET
- Can be flange mounted or foot mounted
- Composite molded bushing eliminates corrosion and build-up between bracket and mounting tube. Allows constant blade pressure to belt
- Elongated holes allow for easy alignment of installation
- Set screw that allows pre-tensioning of cleaner making it more accurate
“Not just assembled in the U.S.A.
but made in the U.S.A.”
EZ TORSION SYSTEM
This revolutionary design is the simplest and most accurate tensioning system on the market.
Only 4 components make up the EZ Torsion System.
- Universal Torsion Mounting Bracket
- Stainless Steel Spring
- EZ Torsion Ring
- Tension Guide Cap
EASY TO SET AND STAYS SET
Ev-r-wear™ Blade
Our special formulated urethane with additives has been tested and proven to last longer than any other blade on the market.
- Premium urethane
- Additive for lubricity (non-stick)
- Additive for high abrasion
“With over 35 years molding experience"
By Far The Easiest Cleaner to Install and Maintain
E4HD CLEANERORDERING INFORMATION - E4HD Series |
||||||||
|---|---|---|---|---|---|---|---|---|
| BELT WIDTH | S.S. SPRING |
ORDER NUMBER | -2 BLADE WIDTH | MOUNTING TUBE LENGTH | ORDER NUMBER | -8 BLADE WIDTH | MOUNTING TUBE LENGTH | |
| 18" | Single | E4HDCSM18 | 16" | 56" | E4HDCSM18-8 | 10" | 56" | |
| 24" | Single | E4HDCSM24 | 22" | 62" | E4HDCSM24-8 | 16" | 62" | |
| 30" | Single | E4HDCSM30 | 28" | 68" | E4HDCSM30-8 | 22" | 68" | |
| 36" | Single | E4HDCSM36 | 34" | 74" | E4HDCSM36-8 | 28" | 74" | |
| 42" | Single | E4HDCSM42 | 40" | 80" | E4HDCSM42-8 | 34" | 80" | |
| 48" | Single | E4HDCSM48 | 46" | 86" | E4HDCSM48-8 | 40" | 86" | |
| 54" | Single | E4HDCSM54 | 52" | 92" | E4HDCSM54-8 | 46" | 92" | |
| 60" | Single | E4HDCSM60 | 58" | 98" | E4HDCSM60-8 | 52" | 98" | |
| 72" | Single | E4HDCSM72 | 70" | 110" | E4HDCSM72-8 | 64" | 110" | |
| Cleaner will come with Tensioner on right side unless specified left. Dual Tensioner available upon request. | ||||||||
E4HD STAINLESS STEEL CLEANERORDERING INFORMATION - E4HD Series |
||||||||
|---|---|---|---|---|---|---|---|---|
| BELT WIDTH | S.S. SPRING |
ORDER NUMBER | -2 BLADE WIDTH | MOUNTING TUBE LENGTH | ORDER NUMBER | -8 BLADE WIDTH | MOUNTING TUBE LENGTH | |
| 18" | Single | E4HDSSCSM18 | 16" | 56" | E4HDSSCSM18-8 | 10" | 56" | |
| 24" | Single | E4HDSSCSM24 | 22" | 62" | E4HDSSCSM24-8 | 16" | 62" | |
| 30" | Single | E4HDSSCSM30 | 28" | 68" | E4HDSSCSM30-8 | 22" | 68" | |
| 36" | Single | E4HDSSCSM36 | 34" | 74" | E4HDSSCSM36-8 | 28" | 74" | |
| 42" | Single | E4HDSSCSM42 | 40" | 80" | E4HDSSCSM42-8 | 34" | 80" | |
| 48" | Single | E4HDSSCSM48 | 46" | 86" | E4HDSSCSM48-8 | 40" | 86" | |
| 54" | Single | E4HDSSCSM54 | 52" | 92" | E4HDSSCSM54-8 | 46" | 92" | |
| 60" | Single | E4HDSSCSM60 | 58" | 98" | E4HDSSCSM60-8 | 52" | 98" | |
| 72" | Single | E4HDSSCSM72 | 70" | 110" | E4HDSSCSM72-8 | 64" | 110" | |
| Cleaner will come with Tensioner on right side unless specified left. Dual Tensioner available upon request. | ||||||||
BLADE MATERIAL OPTIONS |
||||
|---|---|---|---|---|
 |
 |
 |
 |
 |
| FDA Polyurethane Natural 85A |
Heat Resistant -40 to 300 °F Red 95A |
Eagle Ev-R-Wear™ |
Chemical / Acid Resistant Green 80A |
Solid Polyurethane Orange 90A |